- Overview
- Product Description
- Product Parameters
- Detailed Photos
- Dimension and wiring
- Packaging & Shipping
- Company Profile
- Certifications
- FAQ
Basic Info.
Model NO.
LSA10 series
Output Mode
Dual-Channel Ossd Output/Alarm Output
Anti-Light Interference
Sunlight Max10000lux
Delay on
2s
Shipping Method
DHL,EMS,TNT,FedEx
Detection Range
0.5~6m
Work Mode
No/Nc for Selecting
Communication Mode
Optical Synchronous
Space Between The Optical Axis
10mm
Transport Package
Carton Package
Specification
As per model
Trademark
G-TEK
Origin
Tianjin China
HS Code
903290009
Production Capacity
3000 Units/Month
Packaging & Delivery
Package Size
50.00cm * 20.00cm * 20.00cm
Package Gross Weight
5.000kg
Product Description
Safety light curtains are also photoelectric safety protection devices (safety protectors, punch protectors, infrared safety protection devices, etc.). In modern factories, people and machines work together, and they can be installed on some potentially dangerous mechanical equipment to protect workers. Prevent security incidents from happening. For Example, stamping machinery, shearing equipment, metal cutting equipment, automated assembly lines, automated welding lines, mechanical transmission, and handling equipment, and hazardous areas (toxic, high pressure, high temperature, etc.), are likely to cause personal injury to operators, can be installed.
1. The unique structural design ensures that there is no blind spot in the entire protection area;
2. Dual-channel OSSD output function, which can be cross-monitored with each other;
3. The self-diagnosis function can detect the failure circuit module of the light curtain. and issue an alarm signal;
4. With interlock reset, external test, and EDM function, strengthen the output monitoring ability;
5. Adopt optical communication synchronization, simplify the electrical connection and make the operation easier;
6. Meet the requirements of Type 4, SIL3 and PLe safety levels, and can be used for the protection of various parts of the body;
7. Waterproof design to meet outdoor applications
| Technical Parameters | |
| Light Curtain | LSA |
| Supply voltage | 24 VDC±20% |
| Supply Current | ≤300mA |
| Consumption | ≤5W |
| Delay on | 2s |
| Detection distance | As Mode information |
Space between the optical axis | 10mm20mm40mm80mm |
| Effective aperture | ±2.5°@3m |
| Protection rate | IEC IP65 |
| Communication mode | Optical synchronous |
Standard | IEC 61496 standard, meet Type4 |
| ISO 13849-1 standard, meet to PLe | |
| IEC 61508,IEC62061,meet to SIL3 | |
| Work environment | Temperature: -25ºC~50ºC; Storage: -40ºC~75ºC; Humidity: 15~95%RH; Anti-light interference: >10000Lux; Vibration resistance: 5g, 10~55Hz(EN 60068-2-6); Impact resistance: 10g, 16ms(EN 60068-2-29); insulation resistance: >100MΩ; Residual ripple voltage: 4.8Vpp; |
| Connector | M12,6 pins(Emitter),8 pins(Receiver) |
| Emitter & Receiver Parameters | ||
| Emitter light | Infrared light 850nm | |
Output Mode | Emitter | Alarm output,transistor PNP/NPN for selecting; output current<150mA(30V DC) |
| Receiver | 2 OSSD output,PNP NC ,short-circuit protection,Cross circuit monitoring,output current <200mA(30V DC) | |
| Indicator | See indicator instruction | |
| Response time | 3.2~51.2ms(on a product model basis) | |
| Switch voltage | Voltage drop:≤1.5V; cutoff voltage: ≤1.2V | |
| OSSD Test | Pulse width:200~300ms pulse cycle:50~100ms | |
| Load | capacitance:30nF, inductance:2.2H | |
| Resistance | Device and load resistance:2.5Ω Power cable resistance: ≤10Ω | |
| TEST input | Active high * | |
| RESET input | Active high* (manual reset or automatic reset) | |
| EDMSE input | Active high * | |
| EDM input | 10~30V DC,current<10mA | |
| LSA10 series | ||||||
| Model | Detection distance(m) | Resolution ratio (mm) | Light beams quantity | Safe height (mm) | Response time( m s) | Product Length(mm) |
| LSA10032 | 0.5~6m | 15mm | 32 | 320 | 9.1 | 325 |
| LSA10048 | 48 | 480 | 13.4 | 485 | ||
| LSA10064 | 64 | 640 | 17.6 | 645 | ||
| LSA10080 | 80 | 800 | 21.8 | 805 | ||
| LSA10096 | 96 | 960 | 26.0 | 965 | ||
| LSA10112 | 112 | 1120 | 30.2 | 1125 | ||
| LSA10128 | 128 | 1280 | 34.4 | 1285 | ||
| LSA10144 | 144 | 1440 | 38.6 | 1445 | ||
| LSA10160 | 160 | 1600 | 42.8 | 1605 | ||
| LSA10176 | 176 | 1760 | 47.0 | 1765 | ||
| LSA10192 | 192 | 1920 | 51.2 | 1925 | ||
Diagnostic function
1. Self-failure test function
When the power is on (within 2 seconds), the light curtain carries out a self-test to confirm whether there is a fault. In addition, a self-test will be performed periodically (within response time) during the work process.
2. Control output(OSSD)waveform
When the light curtain is in the lighting state( the beams are not blocked), the control output is NO, while to test the output circuit, the Control output will turn to OFF Periodically and the output circuit is diagnosed as normal if the OFF signal was feedback. When the off-pulse signal is not included in the output signal, the output circuit or wiring of the receiver is diagnosed as a fault, and the light curtain immediately enters the locking state.
Product self-inspection steps
1. Detect whether the installation position of the object and the proximity sensor has deviated, slacked, or skewed; whether there is slack, poor contact, or disconnection in the wiring and connection parts
2. Whether there is adhesion or accumulation of metal dust, etc.
3. Is there any abnormality in using temperature conditions and environmental conditions?
4. Set whether the flashing of the display lamp type is abnormal.
If you must be careful not to disassemble and repair by yourself during the inspection, and to easily find out the fault, you can investigate the operating state of the sensor through the connection with the portable detector, and then repair it according to the situation.
To make the photoelectric sensor work stably for a long time, it should be regularly checked with the same contents as the general control equipment to maintain its long-term function. The photoelectric sensor can also be stocked. Once a problem with the photoelectric sensor is found, we can replace it in time without affecting the use of the sensor.
| About G-TEK Sensor | |
| 1 | Tianjin G-TEK Automation Technology Co., Ltd. was established in 2003, its main products are photoelectric sensors and proximity sensors; |
| 2 | In 2004, the LST infrared vehicle separator, also known as the infrared vehicle separating light curtain independently developed by the company came on the market and gradually occupied the domestic market of highway toll weighing system |
| 3 | In 2009, the Haitai Green Industrial Park established production and operation workshops, the same year a new generation of intelligent defrost-type infrared vehicle separator LHA (C) series curtain sensor came out, and was supported by the National Innovation Fund |
| 4 | In 2013, further, expand the scale of production and operation, and set up special workshops for the production of sensor switches and vehicle separators light curtain sensors |
| 5 | In 2014, the research and development team and sales team of the company are strengthened, the new research and development production base project is launched, and Tianjin G-TEK Sensor Technology Co., Ltd. is registered and established |
| 6 | In 2016, G-TEK passed the certification of national high-tech enterprises, and the construction of the new R&D and production base of G-TEK began at the end of the same year |
| 7 | At the end of 2017, the first long-distance, high-precision, and fast-scanning LSD101 laser sensor was officially released; the Shenzhen Office was established in the same year |
| 8 | The whole series of Lidar products were launched in 2018, and the TOF 3D vision sensor was introduced |
| 9 | The new R&D and production base of G-TEK is completed and the company is relocated in 2019, effectively expanding the R&D, production, and quality assurance capabilities |
| 10 | In 2020, the company participates in the national highway renovation project, and the lidar vehicle profile system is widely used in domestic ETC projects, achieving a new high annual sales, and is rated as one of the top 50 private enterprises in Xiqing District, and the research and development center of the company is rated as a district-level technology center |
| 11 | In 2021, LDN was launched, the LMO series laser scanner product project was launched, several photoelectric sensor products were upgraded, the company's production system was further expanded, and great progress was made in the warehousing logistics industry market development |
A: The production cycle for large quantities of products takes 15-30 days, depending on the product.
Q: Can you provide professional advice promptly?
A: We have a professional technical team that can patiently help you answer all professional questions.
Q: Can you provide customized products/services?
A: Yes, we can provide customized products, but the customization needs to meet a certain quantity.
Q: How is the quality of the product? Is the quality stable?
A: G-TEK Sensors has been focusing on the sensor field for 23 years. The quality of the sensor has the double affirmation of the CE certificate and customer reputation.
Q: What is your MOQ?
A: We offer MOQ per piece; it depends on your specific order.
Q: Is there any relevant terms of service and warranty information?
A: We offer a warranty on all items. The sensor products are guaranteed for 15 months, and the light curtain and lidar products are guaranteed for 18 months. For after-sales questions, you can directly contact the product salesperson.
Q: Is there any relevant information available for download on the website?
A: Yes, if you want to download the relevant product manual, you can go to our official website to download it.
Q: Can I be your reseller?
A: Yes, we are looking for distributors in overseas markets.
